Welcome back! This week, I have a new disaster to tell you about, new podcast episodes, and better mockups that give a better idea of what the gold foil will look like. So let’s dive in!
First off, I’m Ran, Sarn’s son from the Curse Breaker Series, and we need to talk about this week’s disaster, which starred my scribe, unfortunately. What did she do now?
The Disaster in the Room
You’d think that my scribe, Melinda, learned her lesson when she tried to put together the last piece of furniture that she ordered. But you’d be wrong!
On Tuesday, after work, the couch that she ordered finally arrived in two boxes. That wasn’t the disaster part. The trouble started when my scribe unboxed all of the pieces of the couch.
- None of them were labeled.
- There were no extra pieces.
- The instructions have no words, only small, confusing pictures
We already we had the makings of another disaster, and I pointed that out. But my scribe persevered. She wanted the couch built ASAP. So she pulled out the instructions and stared at the front page which had drawings of all the pieces.
Since the pieces weren’t labeled, she had to work out which piece was what. That took a while because some pieces looked a lot a like. But she figured out which pieces she needed for step 1, so she got to work.
In her defense, she did assemble one armchair all on her own and without much difficulty. But the makers of that chair labeled everything, provided clear instructions, and included extra parts in case something happened.
So I get why the couch assembly seemed like something she could do. I sat on that chair so I was out of the way and could not be blamed if things went awry. Also, my scribe wasn’t alone.
When the boxes arrived, the delivery man transported them down the steps leading from the lobby to my scribe’s apartment and knocked, so she opened the door. But her neighbor also opened her door and asked what was in the boxes. Melinda told her and her neighbor decided my scribe probably needed help. (Spoiler alert: she did!) So she grabbed a box and pushed it inside.
Did I mention the two boxes were taller than my scribe and her neighbor?
So after the unboxing, Melinda tackled step one while her neighbor went to check on the painter working in her apartment. Don’t worry. She came back for step 2. Things seemed to be going well until they got to step 5. That was when Melinda realized that the hinge piece that she put on three steps earlier wasn’t oreinted correctly.
The couch she bought is supposed to lay flat like a bed, but it doesn’t pull out, so there’s no rails. Instead, the back leans back and becomes flat. The couch came with a padded ottoman that becomes the final part of the bed instead of the pull-out part.
Thankfully, the ottoman came all in one piece and we just had to put the cushion on, so no construction was needed. (I handled that part on my own since I just needed to pull the fabric strip off to reveal the velcro and stick it on.)
I don’t know why the rest of the couch didn’t come in less pieces and more put together. There were certainly enough room in the box for that. But I digress.
Disaster Strikes
My scribe put the hinge pieces on the wrong way. Instead of bending back, it was bending forward. Melinda set to work removing the screws from the left hinge. No problem there. That one came off and she flipped it around and put the screws back in. All good so far!
The problem came with the right hinge. Melinda got one screw out, but the second screw wouldn’t come out. Her screwdriver just destroyed the top part of the screw where there’s a cutout that the screwdriver is supposed to fit into.
We don’t know why that happened. It didn’t happen on any other screw. Maybe that one was just defective?
Because of that issue, Melinda couldn’t get the screw out. So her neighbor suggested that she get some help from an expert. Melinda tried for a while longer to get the screw out because she doesn’t give up. Eventually, she had to admit defeat and hire someone to get the screw out.
So she booked a handyman for the next day and waited.
The next day, she went to the office and at the end of the work day, the handyman came. He was a really nice guy, and he had brought a drill. I thought for sure that he’d have that screw out and the hinge flipped the correct way and the couch completed in no time.
That wasn’t what happened. He did remove the screw, flip the hinge, and reinstall it but then he encountered another problem when he couldn’t connect the back to the rest of the couch.
The instructions were so unclear that it took another half hour before he figured out that there were pieces missing! The hinge assemble step didn’t show the pieces or how they went together. It just had arrows and letters, but the pieces weren’t labeled, not even the screws. Unfortunately, there were multiple sizes of screws, making it harder to tell what screw was needed for each step.
He figured out how the hinges should be assembled and attached and then the back slid into the grooves like they were supposed to. After that, the couch was done and they just needed to add the cushions. This is the last piece of furniture that needed assembly, so hopefully, things will be less dramatic around here.
Also, Melinda has agreed that she shouldn’t consider a future career in furniture assembly.
Did I get any page time this week?
Yes I did! Melinda wrote the first four chapters of Curse Breaker Unleashed.
So we’re off on another adventure, and it’s already not going well. If you’ve read any of the Curse Breaker books, then you know that’s what generally happens. We start off great in the first chapter, and we make some decisions that at the time doesn’t seem questionable. But in hindsight, maybe we shouldn’t have done that.
Curse Breaker Unleashed picks up minutes after Curse Breaker Jousts and Chaos in Chains ends. Literally, only a couple minutes passed, and we’re already in trouble. But you’d expect no less from us, and we aim to please.
Well, I do. Papa wasn’t happy about us getting into trouble so quickly after our last adventure ended. He was hoping for a bit more down time and some more sleep.
So that’s where that is. If you want to read along with us, all four chapters are published on Substack and Patreon.
And now back to our coverage of the upcoming launch of the Riders of the Apocalypse series which includes Curse Breaker Jousts.
Riders of the Apocalypse
Last week, I showed you some early mockups of the special features for Chaos Rises. It still didn’t capture the gold well, so my scribe went back to Photoshop and put together something that looks more like what it’s actually going to look like.
These mockups are more orange than the actual will be. For some reason, she couldn’t get the gold to look like gold without making it a bit of orange. So just pretend it’s not orange and that it’s actually gold. But it gives it better idea of what these are actually going to look like.
We also have the edge design included! The actual edges might be darker. We’ll find out when we get the actual copies of the books. This mockup represents our best guess based on the 3d proof from the printer.

Follow the campaign now! Share it with your friends too. We have almost 200 followers, and that’s really exciting.
We’ve ordered all the proofs and the dispatch date is October 19th. But that’s just an estimate. We won’t actually know when they will print until we get the shipping confirmation and tracking link. So we’ll just keep you in the loop on that.
For this campaign, we’ll have an actual box for the set. So there will be a tier where you could get all four special edition hard covers in a specially design box that fits them and has imagery from the series.
(Image coming soon. Melinda is trying to create a mockup of what that will look like, but she ran into technical difficulties since the 3d mockup the printer provides does not show the books in the slip case.)
Melinda’s also working on a special digital booklet to replace the reading order PDF. It’ll still have the reading order, but it’ll have maps and maybe some other stuff. We’re still arguing about that.
Melinda would like to wrap that up this coming week, but I don’t know if we’ll let her. We may have to go a few rounds until we’re all happy. So I’ll have to let you know how that goes.
New Podcast Episodes!
Melinda recorded 2 new episodes this week, one with a guest and one update episode since the second author who signed up to be interviewed didn’t show up. Here are the general links to our podcast, where you can find the new episodes:
These are the latest episodes as of this newsletter:


I hope you enjoy listening to them as much as my scribe enjoyed doing the interview.
That’s all I have for you this week
New Books & Special Editions

Prefer a physical book in your hands? Look no further! These Kickstarter Authors have teamed up to offer a dazzling selection of collectible books. Available for a limited time. Check out their campaigns now!

Legends of Neverland: Deluxe Special Edition Hardcovers II
Villains get their love stories in these dark fairytale retellings packed with pirates, spies, adventure & no-spice fantasy romance. Follow the campaign now!

Tales of Ferrês: Epic Fantasy Special Anniversary Editions
Do you love dragon riders, dragons, elves, dwarves, and magical forests? Then get 10+ fantasy stories +bonus exclusive story to the set. Back the campaign now.